Tuesday, January 16, 2018

Guide How to Flash Firmware Motorola DROID RAZR HD Using RSD Lite

Guide How to Flash Firmware Motorola DROID RAZR HD Using RSD Lite.

Flash Motorola DROID RAZR HD. If you have any problem on Motorola DROID RAZR HD firmware, you can follow this guide below to flash or install firmware on Motorola DROID RAZR HD. Firmware is a software embedded on Android device to run, control and manage all hardware. To run device well firmware should has no problem. You can follow this guide below to update the firmware, or solve a bootloop problem. To flash or install a firmware we need RSD Lite, this software work like a flash tool, but only designed for Motorola smartphone. 

Please make sure your device is Motorola DROID RAZR HD that meet with this specifications. This device is for Verizon, and also known as Motorola DROID Vanquish, Motorola DROID Fighter or Motorola XT926. Motorola DROID RAZR HD released on 2012, September. With 4.7 inches Super AMOLED capacitive touchscreen, 16M colors, powered by Dual-core 1.5 GHz CPU, Qualcomm MSM8960 Snapdragon S4 Plus chipset, Adreno 225 GPU, Supported by 1 GB internal memory, 8 MP primary camera, 1,3 MP secondary camera. And run on Android OS, v4.0.4 (Ice Cream Sandwich), upgradable to v4.4 (KitKat).

A tutorial flashing Motorola DROID RAZR HD start here.

Prerequisites.

  1. Once flashing process run on your Motorola DROID RAZR HD, all data and file wiped. So, try to back up it as soon as possible.
  2. Dont let your Motorola DROID RAZR HD battery at low state, to avoid the flashing process fail.
  3. To connect your Motorola DROID RAZR HD device to the computer, always use an original USB cable.
  4. Driver for Motorola RAZR HD XT925 must installed correctly, if you dont have the driver yet please download via this link below.
    5. https://androidmtk.com/download-motorola-usb-drivers
  5. Download and install RSD Lite Multi flash to the computer or laptop.
    6. http://rsdlite.com/rsd-lite-download/
  6. Here you can download Motorola DROID RAZR HD firmware file.
    • Select your appropriate firmware from link below
      • https://firmware.center/firmware/Motorola/Droid%20RAZR%20HD%20%28Droid%20RAZR%20HD%20MAXX%29/Stock/

Flashing Guide.

  1. Now, boot Motorola DROID RAZR HD device to bootloader mode. How to do it ?
    • Power off the Motorola DROID RAZR HD, by press and hold power button for a seconds, it will completely turn off the device.
    • Now, press and hold both volume down + volume up button.
  2. Now , connect your Motorola DROID RAZR HD to the computer via USB cable.
  3. Make sure your Motorola DROID RAZR HD successfully detected on your computer via bootloader mode.
  4. If failed, try to use original USB cable or change your computer port.
  5. Then, Open your RSD Lite software on your computer from start menu.
    rsd lite flash tool
    rsd lite flash tool
  6. Click the button assigned with red circle show at pict ure above to load Motorola DROID RAZR HD firmware.
  7. Firmware file should have this extensions (*.xml, *.shx, *.sbf, *.hs, etc)
  8. Once your Motorola DROID RAZR HD firmware successfully load, RSD lite flash tool should look like picture shown below.
    rsd lite
    rsd lite
  9. Now click start button. to begin the flashing process.
  10. Flashing process will start automatically without your interference.
  11. Just wait a while until flashing your Motorola DROID RAZR HD done.
at

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)